Load routines |
Prev: 23831 | Up: Map | Next: 32815 |
Used by the routine at 32815.
|
||||
32768 | INC SP | Place the address 0 on the stack above the current return address, so the Spectrum will reset if there's a loading error | ||
32769 | INC SP | |||
32770 | EX (SP),HL | |||
32771 | LD H,0 | |||
32773 | LD L,H | |||
32774 | EX (SP),HL | |||
32775 | DEC SP | |||
32776 | DEC SP | |||
32777 | LD A,6 | |||
32779 | CALL 32785 | Listen for one edge | ||
32782 | RET NC | Return if no edge was found within the time limit | ||
This entry point is also used by the routine at 32815.
|
||||
32783 | LD A,11 | Wait a bit | ||
32785 | DEC A | |||
32786 | JR NZ,32785 | |||
32788 | AND A | Reset the carry flag | ||
32789 | INC B | Have we run out of time to find an edge? | ||
32790 | RET Z | Return with the carry flag reset if so | ||
32791 | LD A,127 | Collect an EAR port reading in bit 6 of A | ||
32793 | IN A,(254) | |||
32795 | RRA | Move it to bit 5 of A | ||
32796 | AND A | In the analogous ROM routine, the instruction here is 'RET NC', causing a return if BREAK was pressed; in this routine, that behaviour is disabled (pressing BREAK does nothing) | ||
32797 | XOR C | Compare this EAR port reading with the previous one | ||
32798 | AND 32 | |||
32800 | JR Z,32789 | Jump back if they are the same (i.e. no edge was found) | ||
32802 | LD A,C | Alternate the border colour | ||
32803 | CPL | |||
32804 | LD C,A | |||
32805 | AND 7 | |||
32807 | OR 8 | |||
32809 | OUT (254),A | |||
32811 | SCF | Signal: an edge was found within the time limit | ||
32812 | RET | Return with B indicating the time taken to find the edge |
Prev: 23831 | Up: Map | Next: 32815 |